« Unix::wireguard » : différence entre les versions

De wiki_pcwiki2
Aller à la navigationAller à la recherche
Aucun résumé des modifications
Aucun résumé des modifications
Ligne 31 : Ligne 31 :
   
   
  [Peer]
  [Peer]
# Clé du client SRV17  
        # Clé du client SRV17  
Publickey = 7wBupLOQktTuwVecurg9+ZgcgwqIzHbRAfgZVnDMfws=
Publickey = 7wBupLOQktTuwVecurg9+ZgcgwqIzHbRAfgZVnDMfws=
PersistentKeepalive = 20
PersistentKeepalive = 20
Ligne 37 : Ligne 37 :
AllowedIPs = 10.11.12.3/32
AllowedIPs = 10.11.12.3/32
  [Peer]
  [Peer]
# Clé du client SRV09  
        # Clé du client SRV09  
Publickey = acVxZhdBXe87kPX4ARmhrKZ4RcZlZFgUcZZo2iEgei8=
Publickey = acVxZhdBXe87kPX4ARmhrKZ4RcZlZFgUcZZo2iEgei8=
PersistentKeepalive = 20
PersistentKeepalive = 20
Ligne 43 : Ligne 43 :
AllowedIPs = 10.11.12.1/32
AllowedIPs = 10.11.12.1/32
  [Peer]
  [Peer]
# Clé du client SRV18  
        # Clé du client SRV18  
Publickey = BPBurdxfynCJtK6yh4fVlD6zF+rH03ZE7QQuqulQlSs=
Publickey = BPBurdxfynCJtK6yh4fVlD6zF+rH03ZE7QQuqulQlSs=
PersistentKeepalive = 20
PersistentKeepalive = 20
Ligne 49 : Ligne 49 :
AllowedIPs = 10.11.12.18/32
AllowedIPs = 10.11.12.18/32
  [Peer]
  [Peer]
# Clé du client XPS13  
        # Clé du client XPS13  
Publickey = IxCXwhfZ5Lf0yYUSZR5g+5aeRkFAmNIKLtHVd9MX0Cc=
Publickey = IxCXwhfZ5Lf0yYUSZR5g+5aeRkFAmNIKLtHVd9MX0Cc=
PersistentKeepalive = 20
PersistentKeepalive = 20
Ligne 66 : Ligne 66 :
   
   
  [Peer]
  [Peer]
# Clé du serveur (OVH2)
        # Clé du serveur (OVH2)
Publickey = cfylLxAtWKBu+5HEoGd3qYjhzCRyAxvkZEt3BIkd+2E=
Publickey = cfylLxAtWKBu+5HEoGd3qYjhzCRyAxvkZEt3BIkd+2E=
PersistentKeepalive = 20
PersistentKeepalive = 20
Endpoint = 51.68.207.177:51820
Endpoint = 51.68.207.177:51820
AllowedIPs = 10.11.12.0/24
AllowedIPs = 10.11.12.0/24

Version du 26 juin 2024 à 12:27

KEYWORDS: WIREGUARD, VPN

Le 25/06/2024:
Bouygues a l'air de merdouiller sur les ports forwarding (exemple: 1113 & 1114 ok, ssh pas ok !)
J'ai donc prévu de mettre un VPN entre OVH[1,2] et Bois Dery et j'ai choisi wireguard.
apt install -y wireguard

Avant tout, il faut modifier /etc/sysctl.conf:
#Pour Wireguard (25/06/2024):
net.ipv4.ip_forward=1
net.ipv4.conf.all.proxy_arp=1
Puis, sysctl -p pour rendre ces ordres pérennes.

Puis installer le paquet resolvonf
 
Ensuite, attention, les fichiers de conf sont très sensibles aux /32, /24 ... :

Configuration du serveur:
# OVH2::/etc/wireguard/wg0.conf
[Interface]
# Le 25/06/2024:
Address = 10.11.12.2/32
ListenPort = 51820

# Private Key du serveur OVH2:
PrivateKey = gBHG/+MoOtoQoMiAtx0IjegwOejtHO4ccIgM3ljweUc=
 
PostUp   = iptables -A FORWARD -i %i -j ACCEPT; iptables -A FORWARD -o %i -j ACCEPT; iptables -t nat -A POSTROUTING -o eno3 -j MASQUERADE
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -D FORWARD -o %i -j ACCEPT; iptables -t nat -D POSTROUTING -o eno3 -j MASQUERADE

[Peer]
       # Clé du client SRV17 

Publickey = 7wBupLOQktTuwVecurg9+ZgcgwqIzHbRAfgZVnDMfws= PersistentKeepalive = 20 Endpoint = 51.68.207.177:51820 AllowedIPs = 10.11.12.3/32

[Peer]
       # Clé du client SRV09 

Publickey = acVxZhdBXe87kPX4ARmhrKZ4RcZlZFgUcZZo2iEgei8= PersistentKeepalive = 20 Endpoint = 51.68.207.177:51820 AllowedIPs = 10.11.12.1/32

[Peer]
       # Clé du client SRV18 

Publickey = BPBurdxfynCJtK6yh4fVlD6zF+rH03ZE7QQuqulQlSs= PersistentKeepalive = 20 Endpoint = 51.68.207.177:51820 AllowedIPs = 10.11.12.18/32

[Peer]
       # Clé du client XPS13 

Publickey = IxCXwhfZ5Lf0yYUSZR5g+5aeRkFAmNIKLtHVd9MX0Cc= PersistentKeepalive = 20 Endpoint = 51.68.207.177:51820 AllowedIPs = 10.11.12.13/32

Configuration d'un client:
# SRV09::/etc/wireguard/wg0.conf
[Interface]
Address = 10.11.12.1/32
ListenPort = 51820
DNS=8.8.8.8
 
# Private Key du client SRV09:
 PrivateKey = WFqHoWYxwQ4rxha4dAXLhJF4Oxq5J3PlVjrqmdvpm3s=

[Peer]
       # Clé du serveur (OVH2)

Publickey = cfylLxAtWKBu+5HEoGd3qYjhzCRyAxvkZEt3BIkd+2E= PersistentKeepalive = 20 Endpoint = 51.68.207.177:51820 AllowedIPs = 10.11.12.0/24