« Unix::ZFS Cheat sheet » : différence entre les versions

De wiki_pcwiki2
Aller à la navigationAller à la recherche
Aucun résumé des modifications
Aucun résumé des modifications
Ligne 2 : Ligne 2 :


  '''Le 18/09/2024:'''
  '''Le 18/09/2024:'''
  J'ai installé deux disques Toshiba de 12 To sur srv09 et j'ai fait un pool en  miroir (donc 12 To seulement).
  J'ai installé deux disques Toshiba de 12 To sur srv09 et j'ai fait un pool en  miroir (donc 12 To seulement):
  apt install -y linux-headers-amd64 zfsutils-linux zfs-dkms zfs-zed -y
   
  time zpool create tank12To-sdc-sdd mirror /dev/sdc /dev/sdd
# apt install -y linux-headers-amd64 zfsutils-linux zfs-dkms zfs-zed -y
  zpool status -v tank12To-sdc-sdd
  # time zpool create tank12To-sdc-sdd mirror /dev/sdc /dev/sdd
  zfs snapshot tank12To-sdc-sdd@20240918
  # zpool status -v tank12To-sdc-sdd
  # zfs snapshot tank12To-sdc-sdd@20240918
# zfs list -t snapshot


'''Le 18/09/2020:'''
'''Le 18/09/2020:'''

Version du 18 septembre 2024 à 17:43

KEYWORDS: ZFS, CHEAT SHEET, 18/09/2020

Le 18/09/2024:
J'ai installé deux disques Toshiba de 12 To sur srv09 et j'ai fait un pool en  miroir (donc 12 To seulement):

# apt install -y linux-headers-amd64 zfsutils-linux zfs-dkms zfs-zed -y
# time zpool create tank12To-sdc-sdd mirror /dev/sdc /dev/sdd
# zpool status -v tank12To-sdc-sdd
# zfs snapshot tank12To-sdc-sdd@20240918
# zfs list -t snapshot

Le 18/09/2020:

Show file system infos
- zfs list             List all ZFS file system
- zfs get all zpool    List all properties of a ZFS file system
Pool Related Commands
# zpool create datapool c0t0d0 	Create a basic pool named datapool
# zpool create -f datapool c0t0d0 	Force the creation of a pool
# zpool create -m /data datapool c0t0d0 	Create a pool with a different mount point than the default.
# zpool create datapool raidz c3t0d0 c3t1d0 c3t2d0 	Create RAID-Z vdev pool
# zpool add datapool raidz c4t0d0 c4t1d0 c4t2d0 	Add RAID-Z vdev to pool datapool
# zpool create datapool raidz1 c0t0d0 c0t1d0 c0t2d0 c0t3d0 c0t4d0 c0t5d0 	Create RAID-Z1 pool
# zpool create datapool raidz2 c0t0d0 c0t1d0 c0t2d0 c0t3d0 c0t4d0 c0t5d0 	Create RAID-Z2 pool
# zpool create datapool mirror c0t0d0 c0t5d0 	Mirror c0t0d0 to c0t5d0
# zpool create datapool mirror c0t0d0 c0t5d0 mirror c0t2d0 c0t4d0 	disk c0t0d0 is mirrored with c0t5d0 and disk c0t2d0 is mirrored withc0t4d0
# zpool add datapool mirror c3t0d0 c3t1d0 	Add new mirrored vdev to datapool
# zpool add datapool spare c1t3d0 	Add spare device c1t3d0 to the datapool
# zpool create -n geekpool c1t3d0 	Do a dry run on pool creation
Show Pool Information
# zpool status -x 	Show pool status
# zpool status -v datapool 	Show individual pool status in verbose mode
# zpool list 	Show all the pools
# zpool list -o name,size 	Show particular properties of all the pools (here, name and size)
# zpool list -Ho name 	Show all pools without headers and columns
File-system/Volume related commands
# zfs create datapool/fs1 	Create file-system fs1 under datapool
# zfs create -V 1gb datapool/vol01 	Create 1 GB volume (Block device) in datapool
# zfs destroy -r datapool 	destroy datapool and all datasets under it.
# zfs destroy -fr datapool/data 	destroy file-system or volume (data) and all related snapshots
Set ZFS file system properties
# zfs set quota=1G datapool/fs1 	Set quota of 1 GB on filesystem fs1
# zfs set reservation=1G datapool/fs1 	Set Reservation of 1 GB on filesystem fs1
# zfs set mountpoint=legacy datapool/fs1 	Disable ZFS auto mounting and enable mounting through /etc/vfstab.
# zfs set sharenfs=on datapool/fs1 	Share fs1 as NFS
# zfs set compression=on datapool/fs1 	Enable compression on fs1
File-system/Volume related commands
# zfs create datapool/fs1 	Create file-system fs1 under datapool
# zfs create -V 1gb datapool/vol01 	Create 1 GB volume (Block device) in datapool
# zfs destroy -r datapool 	destroy datapool and all datasets under it.
# zfs destroy -fr datapool/data 	destroy file-system or volume (data) and all related snapshots
Show file system info
# zfs list 	List all ZFS file system
# zfs get all datapool” 	List all properties of a ZFS file system
Mount/Umount Related Commands
# zfs set mountpoint=/data datapool/fs1 	Set the mount-point of file system fs1 to /data
# zfs mount datapool/fs1 	Mount fs1 file system
# zfs umount datapool/fs1 	Umount ZFS file system fs1
# zfs mount -a 	Mount all ZFS file systems
# zfs umount -a 	Umount all ZFS file systems
ZFS I/O performance
# zpool iostat 2 	Display ZFS I/O Statistics every 2 seconds
# zpool iostat -v 2 	Display detailed ZFS I/O statistics every 2 seconds
ZFS maintenance commands
# zpool scrub datapool 	Run scrub on all file systems under data pool
# zpool offline -t datapool c0t0d0 	Temporarily offline a disk (until next reboot)
# zpool online 	Online a disk to clear error count
# zpool clear 	Clear error count without a need to the disk
Import/Export Commands
# zpool import 	List pools available for import
# zpool import -a 	Imports all pools found in the search directories
# zpool import -d 	To search for pools with block devices not located in /dev/dsk
# zpool import -d /zfs datapool 	Search for a pool with block devices created in /zfs
# zpool import oldpool newpool 	Import a pool originally named oldpool under new name newpool
# zpool import 3987837483 	Import pool using pool ID
# zpool export datapool 	Deport a ZFS pool named mypool
# zpool export -f datapool 	Force the unmount and deport of a ZFS pool
Snapshot Commands
# zfs snapshot datapool/fs1@12jan2014 	Create a snapshot named 12jan2014 of the fs1 filesystem
# zfs list -t snapshot 	List snapshots
# zfs rollback -r datapool/fs1@10jan2014 	Roll back to 10jan2014 (recursively destroy intermediate snapshots)
# zfs rollback -rf datapool/fs1@10jan2014 	Roll back must and force unmount and remount
# zfs destroy datapool/fs1@10jan2014 	Destroy snapshot created earlier
# zfs send datapool/fs1@oct2013 &gt /geekpool/fs1/oct2013.bak 	Take a backup of ZFS snapshot locally
# zfs receive anotherpool/fs1 &lt /geekpool/fs1/oct2013.bak 	Restore from the snapshot backup backup taken
# zfs send datapool/fs1@oct2013 | zfs receive anotherpool/fs1 	Combine the send and receive operation
# zfs send datapool/fs1@oct2013 | ssh node02 “zfs receive testpool/testfs” 	Send the snapshot to a remote system node02
Clone Commands
# zfs clone datapool/fs1@10jan2014 /clones/fs1 	Clone an existing snapshot
# zfs destroy datapool/fs1@10jan2014 	Destroy clone