Kvm::comment forwarder un port vers une VM

De wiki_pcwiki2
Aller à la navigationAller à la recherche

KEYWORDS: FORWARD, FORWARDING, PORT FORWARDING, KVM, QEMU, LIBVIRT, MAILINABOX, OVH2

Info::KVM:: Comment accéder à une VM à partir d'un réseau local (c.a.d pas à partir de la machine hôte)
Le 03/09/2024:
Sauf que, après cette manip, il restait encore un problème car les ports forwardés n'étaient pas visible de l’extérieur.
La véritable solution est ici: http://pcwiki.srv18.pcstreet.org:800/index.php?title=UNix::port_forwarding_entre_ovh2_%26_mx.apsi.net
Le 28/08/2024:
Sauf que après cette manip, la VM a des problèmes réseau (par exemple: impossibilité de faire des apt-get)
J'ai relancé OVH2::iptable et le problème avait disparu.
C'est donc l'interdépendance entre l'iptable du serveur hôte  (OVH2) et l'iptable lancé par la VM dans le hooks qui posait un problème.

J'ai viré /etc/libvirt/hooks/qemu et ajouté un fichier OVH2:/etc/iptables.d/rules/virsh:

#!/bin/bash
# Wed Aug 28 07:33:43 UTC 2024
#  cf: https://www.cyberciti.biz/faq/how-to-configure-ufw-to-forward-port-80443-to-internal-server-hosted-on-lan/

# Includes et configurations pour la VM mailinabox:
. /etc/iptables.d/iptables.conf

# Redirection des ports de OVH2 vers la VM mailinabox:
INTERNAL_IP="192.168.122.227"
PUBLIC_IP="51.68.207.177"

#              ssh apache smtp smtp smtp imap sieve
for intPort in 222 80 443 25   465  587  993  4190
do
       # DNAT: (A priori la première règle suffit à faire marcher les ports forwarding: Wait & See)
       # If you have a server on your internal network that you want make available externally, 
       # you can use the -j DNAT target of the PREROUTING chain in NAT to specify a destination IP address and port 
       # where incoming packets requesting a connection to your internal service can be forwarded:
       /sbin/iptables -t nat -A PREROUTING -i eno3 -p tcp -d ${PUBLIC_IP} --dport ${intPort} -j DNAT --to ${INTERNAL_IP}:${intPort}

       # POSTROUTING & IP MASQUERADING:
       # To allow LAN nodes with private IP addresses to communicate with external public networks, 
       # configure the firewall for IP masquerading, which masks requests from LAN nodes 
       # with the IP address of the firewall’s external device such as eth0:
       # /sbin/iptables -t nat -A POSTROUTING -o eno3 -j MASQUERADE
       # OR:
       # /sbin/iptables -t nat -A POSTROUTING -s 192.168.1.0/24 ! -d 192.168.1.0/24 -j MASQUERADE
done
Le 27/08/2024:
En fin de compte, c'est très simple (cf https://wiki.libvirt.org/Networking.html#Forwarding_Incoming_Connections)

#1) Stopper la VM vers laquelle on veut forwarder un port

#2) Créer (ou éditer s'il existe) /etc/libvirt/hooks/qemu:
    (Exemple pour forwarder le port ovh2::65000 vers mailinabox::65000)

#!/bin/bash

if [ "${1}" = "mailinabox" ]; then

  # Update the following variables to fit your setup
  GUEST_IP="192.168.122.227"
  GUEST_PORT=65000
  HOST_PORT=65000

  if [ "${2}" = "stopped" ] || [ "${2}" = "reconnect" ]; then
   /sbin/iptables -D FORWARD -o virbr0 -p tcp -d $GUEST_IP --dport $GUEST_PORT -j ACCEPT
   /sbin/iptables -t nat -D PREROUTING -p tcp --dport $HOST_PORT -j DNAT --to $GUEST_IP:$GUEST_PORT
  fi
  if [ "${2}" = "start" ] || [ "${2}" = "reconnect" ]; then
   /sbin/iptables -I FORWARD -o virbr0 -p tcp -d $GUEST_IP --dport $GUEST_PORT -j ACCEPT
   /sbin/iptables -t nat -I PREROUTING -p tcp --dport $HOST_PORT -j DNAT --to $GUEST_IP:$GUEST_PORT
  fi
fi
#3) Relancer la VM: c'est fini !