Survival::Outils Lee commandés aux USA
De wiki_pcwiki2
Aller à la navigationAller à la recherche
KEYWORDS: TITANRELOADING, USA, LEE
Commandés chez titanreloading.com le 21/02/2019, reçus le 7/03/2019 (10 business days + 20%=70 euros by French Customs):
Lee Powder Measure Riser! 7.98 USD Outil pour permettre d'utiliser le mesureur de poudre ? The Lee Powder Measure Riser allows use of other brands of dies that have extended adjusting screws and provides clearance for the Lee Safety Prime. This allows the reloader using a turret or progressive press to use their favorite brand of dies while using both the Lee Auto Disk Powder Measure and Lee Safety Prime system. When used this riser lifts the Lee Auto Disk Powder Measure and Auto Drum Powder Measure above the extended adjusting screws of other brands of dies and out of contact with the Lee Safety Prime System eliminating the chances of the powder measure coming into contact with the Safety Prime system and the adjusting screws of other die sets. If using the Lee Safety Prime system this riser is required to raise the Auto Disk and Auto Drum Powder Measures above the Lee Safety Prime System. The riser is not necessary if using Lee dies with the Auto Disk Measure only. Material: Steel Fichier:LeeAuto-Disc-Riser.pdf DOCUMENTS:
LEE CLASSIC CAST TURRET PRESS 104.49 USD Presse avec un barrillet pour 4 outils This press has all the features of the award-winning Turret Press with quality touches that make this the finest, most convenient press to own. The Classic Cast Turret features the solid steel linkage and cast iron base of the Lee Classic Cast. Your first stroke of the hardwood gripped lever will convince you this is one, solid silky smooth press! The sturdy iron base shows its Classic Cast roots. The long stroke allows rifle cases over three inches long to be loaded using the automatic index. Deactivate the Auto-Index and cases as long as the monster 50 BMG can be loaded. The rigid cast iron frame supports the ram with over 12 square inches of area. The industry's largest ram is drilled completely through to dispense primers in an attached clear PVC tube. Every primer is caught--guaranteed. Instant change turrets are the same as the famous Lee Turret Press. The Classic Cast Turret uses the new Lee Lever Primer System (LPS) and the Lee Safety Prime tool makes priming on the press a delight. Specifications: Press Type: Turret Press Nmber of Stations: 4 Frame Material: Steel and Cast Iron Frame Opening Size: 4-1/2" Handle Location: Bottom Right or Left Die Size Accepted: 7/8"-14 Threaded Dies Ram Stroke: 3-1/2" Ram Diameter: 1-1/8" Priming Feature: Lever Prime Number of Mounting Holes: 3 Mounting Hardware Included: No Fichier:LeeClassicTurretPress.pdf DOCUMENTS:
Lee Extra 4 Hole Turret Barrillet supplémentaire pour la presse (permet d'avoir deux jeux d'outils montés en permanence GET A TURRET FOR EACH SET OF DIES 10.99 USD Once the dies have been adjusted, they never need readjusting. Simply snap the turret and dies into the turret press and you're ready to reload another caliber. Uses 7/8"-14 threaded dies.Lee Safety Prime Small and Large Primer Feeder 21.75 USD Alimenteur automatique d'amorces (sur la presse) Now Includes the new Folding Primer Tray Makes priming on the press a delight. Never touch the primers from box to shell. Primer flip tray features a CAD designed flipping surface that instantly rights the primers. Change primer size in seconds. Primers are dispensed with a satisfying click of the primer feed trigger. Use any brand of primers because the priming operation is remote from the feeder. Works on all presses 2006 and later that have the Lever Prime System (LPS). Lee Safety Prime is a new priming system for both small and large primers, never touch the primers from box to shell. Used with 2006 and newer Breech Lock Challenger Presses, Turret Presses, the Classic Cast Turret Press and the Classic Cast Press. NOTE: Lee Auto-Disk Powder Measure Riser (sold separately) is required for installation of this Safety Prime on all Turret Presses. Material: Plastic Fichier:LeeSafetyPrimerFeed.pdf DOCUMENTS:
Il y avait sur chaque moule une étiquette: This mold must be cleaned and lubricated before use Failure to lubricate will result in premature mold failure and irreparable damage LEE DOUBLE CAVITY BULLET MOLD 379-250-RF 18.49 USD 375 WINCHESTER Moule pour 2 ogives .375 winchester (big bore) Lee Double Cavity Bullet Mold 379-250-RF produces a .379 diameter 250 grain round nose bullet suitable for cartridges like 375 Winchester, 38/55. Lee mold blocks are machined from aluminum blocks because of its exceptional molding qualities. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together and then lathe-bored for unmatched roundness and size control. All Lee 1- and 2-cavity molds come with mold handles and hard anodized sprue plates. Fichier:LeeBulletMold.notice.pdf DOCUMENTS:
LEE DOUBLE CAVITY BULLET MOLD 429-214-SWC 18.49 USD 44 MAGNUM Moule pour 2 ogives .44 Lee Double Cavity Bullet Mold 429-214-SWC produces a .429 diameter 214 grain Semi Wad Cutter nose bullet suitable for cartridges like 44 Special, 44/40, etc.LEE DOUBLE CAVITY BULLET MOLD TL309-230-5R 18.49 USD 30/30 (à vérifier: à priori, c'est bien ça) Moule pour 2 ogives 30x30 Lee Double Cavity Mold TL309-230-5R produces a .309 diameter 230 grain 5 Ogive Radius bullet suitable for cartridges like .300 AAC Blackout.LEE #R3 SHELL HOLDER 4.49 USD (1 pour 375 Winchester et un pour 30x30) Support d'étui dans la presse Lee #R3 Universal Shell Holder is used in most brands of reloading presses. For the 7x30 Waters, 30/30, 375 Winchester and similar cases. Machined to close tolerance for maximum accuracy! Will not work with Lee Auto Prime and Does Not Fit Lee Priming Tools. Material: Hardened SteelLEE #R11 UNIVERSAL SHELL HOLDER 4.49 USD (pour 44 Magnum) Support d'étui dans la presse Lee #R11 Universal Shell Holder is used in most brands of reloading presses. For 303 Savage, 444 Marlin, 44 Special/Magnum, 45 Colt and similar cases.